qmk_firmare/keyboards/fingerpunch/svlinky/rules.mk

68 lines
2.0 KiB
Makefile

# MCU name
MCU = RP2040
BOOTLOADER = rp2040
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
# Either do RGBLIGHT_ENABLE or RGB_MATRIX_ENABLE and RGB_MATRIX_DRIVER
RGBLIGHT_ENABLE ?= no
RGB_MATRIX_ENABLE ?= no # not supported yet, but will add
RGB_MATRIX_DRIVER = ws2812
WS2812_DRIVER = vendor
MIDI_ENABLE = no # MIDI support
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
ENCODER_ENABLE ?= no
EXTRAFLAGS += -flto # macros enable or disable
MOUSEKEY_ENABLE = yes
#HAPTIC FEEDBACK
HAPTIC_ENABLE ?= no
HAPTIC_DRIVER = drv2605l
AUDIO_ENABLE ?= no
AUDIO_DRIVER = pwm_hardware
VIK_ENABLE = yes
# Choose only one (or none) of the options below
# FP_PER56_CIRQUE_LEDS ?= no
# FP_PER56_PMW3360_LEDS ?= no
# FP_PMW3360 ?= no
# FP_WEACT_ST7735 ?= no
# The rest of the VIK logic is in the keyboards/fingerpunch/src/vik/rules.mk
ifeq ($(strip $(VIK_PER56_CIRQUE_LEDS)), yes)
RGBLIGHT_ENABLE = yes
endif
ifeq ($(strip $(VIK_PER56_PMW3360_LEDS)), yes)
RGBLIGHT_ENABLE = yes
endif
ifeq ($(strip $(CIRQUE_ENABLE)), yes)
POINTING_DEVICE_ENABLE := yes
POINTING_DEVICE_DRIVER := cirque_pinnacle_spi
OPT_DEFS += -DCIRQUE_ENABLE
endif
ifeq ($(strip $(FP_SVLINKY_V01)), yes)
OPT_DEFS += -DFP_SVLINKY_V01
endif
include keyboards/fingerpunch/src/rules.mk