qmk_firmare/keyboards/fingerpunch/svlinky/config.h

119 lines
3.9 KiB
C

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// NOTE: All logic for the modules can be found in:
// keyboards/fingerpunch/src/vik/config.h
// keyboards/fingerpunch/src/vik/rules.mk
#pragma once
#include "keyboards/fingerpunch/src/config_pre.h"
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 10
// VIK pin config
#define VIK_SPI_DRIVER SPID1
#define VIK_SPI_SCK_PIN GP14
#define VIK_SPI_MOSI_PIN GP15
#define VIK_SPI_MISO_PIN GP12
#define VIK_SPI_CS GP13
#define VIK_I2C_DRIVER I2CD1
#define VIK_I2C_SDA_PIN GP10
#define VIK_I2C_SCL_PIN GP11
#ifdef FP_SVLINKY_V01
#define VIK_GPIO_1 GP18 // svlinky v0.1
#define VIK_GPIO_2 GP24 // svlinky v0.1
#else // svlinky v0.2
#define VIK_GPIO_1 GP26 // svlinky v0.2
#define VIK_GPIO_2 GP27 // svlinky v0.2
#endif
#define VIK_WS2812_DI_PIN GP16
// Used only if you have a weact st7735 display, set to unused pin
#define VIK_ST7735_UNUSED_PIN GP13
// All the through hole pins from the controller
#ifdef FP_SVLINKY_V01
#define MATRIX_ROW_PINS { GP29, GP28, GP27, GP26, GP22, GP20, GP23, GP21 } // svlinky v0.1
#else
#define MATRIX_ROW_PINS { GP29, GP28, GP18, GP24, GP22, GP20, GP23, GP21 } // svlinky v0.2
#endif
#define MATRIX_COL_PINS { GP0, GP1, GP2, GP3, GP4, GP5, GP6, GP7, GP8, GP9 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// For VIK modules with encoders
#ifdef ENCODER_ENABLE
#ifdef FP_SVLINKY_V01
#define ENCODERS_PAD_A { GP18 } // svlinky v0.1
#define ENCODERS_PAD_B { GP24 } // svlinky v0.1
#else
#define ENCODERS_PAD_A { GP26 } // svlinky v0.2
#define ENCODERS_PAD_B { GP27 } // svlinky v0.2
#endif
#endif
#ifdef CIRQUE_ENABLE
// cirque trackpad config
#define CIRQUE_PINNACLE_SPI_CS_PIN VIK_SPI_CS
// Uncomment 2 lines below to switch to relative mode and enable right click
// Note that tap to click doesn't work on the slave side unless you enable relative mode
// #define CIRQUE_PINNACLE_POSITION_MODE CIRQUE_PINNACLE_RELATIVE_MODE
// #define CIRQUE_PINNACLE_SECONDARY_TAP_ENABLE
#define CIRQUE_PINNACLE_TAP_ENABLE
#define POINTING_DEVICE_TASK_THROTTLE_MS 5
#endif
// If directly testing with svlinky, use VIK RGB only
#ifndef VIK_RGB_ONLY
#define VIK_RGB_ONLY
#endif
#define WS2812_DI_PIN GP16
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 10 // Arbitrary number, gets overridden by the vik module stuff below
#define RGBLIGHT_HUE_STEP 16
#define RGBLIGHT_SAT_STEP 16
#define RGBLIGHT_VAL_STEP 16
#define RGBLIGHT_LIMIT_VAL 130 /* The maximum brightness level for RGBLIGHT_ENABLE */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_TWINKLE
#endif
#include "keyboards/fingerpunch/src/config_post.h"