added audio, haptic feedback, fixed I2C, and tested cirque
This commit is contained in:
Sadek Baroudi
parent
9989e9f4ce
commit
29e8185e6f
|
|
@ -47,27 +47,69 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define RGB_DI_PIN GP26
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#define RGBLIGHT_SPLIT
|
||||
#define RGBLED_SPLIT { 21, 21 }
|
||||
#define RGBLED_NUM 42
|
||||
#define RGBLIGHT_HUE_STEP 16
|
||||
#define RGBLIGHT_SAT_STEP 16
|
||||
#define RGBLIGHT_VAL_STEP 16
|
||||
#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level for RGBLIGHT_ENABLE */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
# define RGBLIGHT_SPLIT
|
||||
# define RGBLED_SPLIT { 21, 21 }
|
||||
# define RGBLED_NUM 42
|
||||
# define RGBLIGHT_HUE_STEP 16
|
||||
# define RGBLIGHT_SAT_STEP 16
|
||||
# define RGBLIGHT_VAL_STEP 16
|
||||
# define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level for RGBLIGHT_ENABLE */
|
||||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
#endif
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
# define SPLIT_TRANSPORT_MIRROR
|
||||
# define DRIVER_LED_TOTAL 42 // Number of LEDs
|
||||
# define RGB_MATRIX_SPLIT { 21, 21 }
|
||||
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
|
||||
# define RGB_MATRIX_STARTUP_HUE 35
|
||||
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
|
||||
# define RGB_DISABLE_WHEN_USB_SUSPENDED
|
||||
# define RGB_MATRIX_KEYPRESSES
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* audio support */
|
||||
#define AUDIO_VOICES
|
||||
#define AUDIO_PIN GP4
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
# define NO_MUSIC_MODE
|
||||
# define STARTUP_SONG SONG(PREONIC_SOUND)
|
||||
# define DEFAULT_LAYER_SONGS \
|
||||
{ SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND) }
|
||||
#endif
|
||||
|
||||
#ifdef HAPTIC_ENABLE
|
||||
# define FB_ERM_LRA 1
|
||||
# define FB_BRAKEFACTOR 3 // For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7
|
||||
# define FB_LOOPGAIN 1 // For Low:0, Medium:1, High:2, Very High:3
|
||||
# define RATED_VOLTAGE 2
|
||||
# define V_PEAK 2.8
|
||||
# define V_RMS 2.0
|
||||
# define F_LRA 150 // resonance freq
|
||||
# define DRV_GREETING alert_750ms
|
||||
# define NO_HAPTIC_ALPHA
|
||||
# define NO_HAPTIC_PUNCTUATION
|
||||
# define NO_HAPTIC_NAV
|
||||
# define NO_HAPTIC_NUMERIC
|
||||
#endif
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define I2C_DRIVER I2CD2
|
||||
#define I2C1_SDA_PIN GP6
|
||||
#define I2C1_SCL_PIN GP7
|
||||
|
||||
// cirque trackpad config
|
||||
#define CIRQUE_PINNACLE_ADDR 0x2A
|
||||
#define POINTING_DEVICE_TASK_THROTTLE_MS 5
|
||||
#define POINTING_DEVICE_ROTATION_90 // move to cirque specific config
|
||||
#define I2C1_CLOCK_SPEED 400000
|
||||
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
|
||||
|
||||
|
|
@ -76,7 +118,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define PMW33XX_CS_PIN GP26
|
||||
#define PMW33XX_CPI 800
|
||||
#define PMW33XX_CS_DIVISOR 8 // needs to be the same as the SHIFTREG_DIVISOR above
|
||||
#define POINTING_DEVICE_INVERT_Y
|
||||
// #define POINTING_DEVICE_INVERT_Y // move to trackball specific config
|
||||
|
||||
#define SPI_SCK_PIN GP2
|
||||
#define SPI_MOSI_PIN GP3
|
||||
|
|
|
|||
|
|
@ -2,11 +2,11 @@
|
|||
|
||||
#include_next "mcuconf.h"
|
||||
|
||||
#undef RP_SPI_USE_SPI0
|
||||
#undef RP_SPI_USE_SPI1
|
||||
#define RP_SPI_USE_SPI1 TRUE
|
||||
|
||||
// #undef RP_SPI_USE_SPI1
|
||||
// #define RP_SPI_USE_SPI1 TRUE
|
||||
|
||||
#undef RP_I2C_USE_I2C0
|
||||
#define RP_I2C_USE_I2C0 TRUE
|
||||
#undef RP_I2C_USE_I2C1
|
||||
#define RP_I2C_USE_I2C1 TRUE
|
||||
|
|
@ -19,6 +19,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|||
RGBLIGHT_ENABLE = no
|
||||
RGB_MATRIX_ENABLE = no
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
WS2812_DRIVER = vendor
|
||||
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
|
|
@ -33,13 +34,22 @@ MOUSEKEY_ENABLE = yes
|
|||
SPLIT_KEYBOARD = yes
|
||||
SERIAL_DRIVER = vendor
|
||||
|
||||
# CIRQUE_ENABLE = no
|
||||
# PMW3360_ENABLE = no
|
||||
|
||||
# ifeq ($(strip $(CIRQUE_ENABLE)), yes)
|
||||
# POINTING_DEVICE_ENABLE = yes
|
||||
# POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c
|
||||
# endif
|
||||
#HAPTIC FEEDBACK
|
||||
HAPTIC_DRIVER = DRV2605L
|
||||
HAPTIC_ENABLE = yes
|
||||
|
||||
# Audio doesn't work with RP2040 yet :(
|
||||
AUDIO_ENABLE = no
|
||||
|
||||
CIRQUE_ENABLE = yes
|
||||
|
||||
ifeq ($(strip $(CIRQUE_ENABLE)), yes)
|
||||
POINTING_DEVICE_ENABLE = yes
|
||||
POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c
|
||||
endif
|
||||
|
||||
# PMW3360_ENABLE = no
|
||||
|
||||
# ifeq ($(strip $(PMW3360_ENABLE)), yes)
|
||||
# POINTING_DEVICE_ENABLE := yes
|
||||
|
|
|
|||
Loading…
Reference in New Issue